Filter
Top Products
439
Preset patches and Algorithm list Effect Block MIDI Implementation Specifications Index
MIDI Implementation
1. Receive Data (Sound Source Section)
■
Channel Voice Messages
●
Note off
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note off velocity: 00H - 7FH (0 - 127)
●
Note on
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note on velocity: 01H - 7FH (1 - 127)
●
Polyphonic Key Pressure
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = Polyphonic Key Pressure: 00H - 7FH (0 - 127)
●
Control Change
❍
Modulation (Controller number 1)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Modulation depth: 00H - 7FH (0 - 127)
❍
Volume (Controller number 7)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Volume: 00H - 7FH (0 - 127)
* Controls the volume of the part that correspond to received MIDI channel number.
❍
Panpot (Controller number 10)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Panpot: 00H - 40H - 7FH (Left - Center - Right),
* Controls the panpot of the part that correspond to received MIDI channel number.
❍
Hold 1 (Controller number 64)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
* Controls the hold of the part that correspond to received MIDI channel number.
❍
Resonance (Controller number 71)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv= Resonance value (relative change):00H - 40H - 7FH (-64 - 0 - +63),
* Controls the resonance of the part that correspond to received MIDI channel number.
❍
Release Time (Controller number 72)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Release Time value (relative change):00H - 40H - 7FH (-64 - 0 - +63),
* Controls the release time of the part that correspond to received MIDI channel number.
❍
Attack time (Controller number 73)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Attack time value (relative change):00H - 40H - 7FH (-64 - 0 - +63),
* Controls the attack time of the part that correspond to received MIDI channel number.
❍
Cutoff (Controller number 74)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Cutoff value (relative change):00H - 40H - 7FH (-64 - 0 - +63)
* Controls the cutoff of the part that correspond to received MIDI channel number.
❍
Effect 1 (Reverb Send Level) (Controller number 91)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Reverb Send Level: 00H - 7FH (0 - 127)
* Controls the reverb send level of the part that correspond to received MIDI channel
number.
❍
Effect 3 (Chorus Send Level) (Controller number 93)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Chorus Send Level: 00H - 7FH (0 - 127)
* Controls the chorus send level of the part that correspond to received MIDI channel
number.
●
Program Change
n = MIDI channel number: 0H - FH (ch.1 - 16)
pp = Program number: 00H - 7FH (prog.1 - prog.128)
* Program change that received each MIDI channel number will function as the patch
change.
Status
2nd byte 3rd byte
8nH
kkH vvH
9nH kkH 00H
Status
2nd byte 3rd byte
9nH
kkH vvH
Status
2nd byte 3rd byte
AnH
kkH vvH
Status
2nd byte 3rd byte
BnH
01H vvH
Status
2nd byte 3rd byte
BnH
07H vvH
Status
2nd byte 3rd byte
BnH
0AH vvH
Status
2nd byte 3rd byte
BnH
40H vvH
Status
2nd byte 3rd byte
BnH
47H vvH
Status
2nd byte 3rd byte
BnH
48H vvH
Status
2nd byte 3rd byte
BnH 49H vvH
Status
2nd byte 3rd byte
BnH
4AH vvH
Status
2nd byte 3rd byte
BnH
5BH vvH
Status
2nd byte 3rd byte
BnH
5DH vvH
Status
2nd byte
CnH
ppH
ECS05_manual_e.book 439 ページ ２００５年１１月３０日 水曜日 午前１１時１４分