Filter
Top Products
163
Using the MV-8000 with MIDI or V-LINK devices
Using the MV-8000 with MIDI or V-LINK
devices
Creating an audio CD Using the MV8-OP1 (Audio I/O
Expansion) to connect external devices
Project and disk management Using data of other formats
6.
Set the Device ID.
Set this value to match the Device ID setting of the MMC messages that are being sent
to the MV-8000.
Transmitting MMC to control an external sequencer
The MV-8000 can transmit MMC (MIDI Machine Control) messages to remotely
control an external MIDI device.
1.
Press .
The
SONG SETUP MENU screen
(p. 256) will appear.
2.
With the cursor located in the upper row of icons, press (Sync).
Alternatively, select the SYNC icon and press .
The
SYNC screen
(p. 259) will appear.
3.
Set the MMC Mode parameter to Master.
The MV-8000 will be the MMC controller.
4.
Turn the MMC Output parameter On for the connector from which you want
MMC to be transmitted.
The MMC messages will be transmitted from the MIDI connector or R-BUS connector
that you turn On.
If the incoming messages have
a device ID of “7F”
(Broadcast), the messages will
b
e received regardless of the
Device ID setting.
ECS05_manual_e.book 163 ページ ２００５年１１月３０日 水曜日 午前１１時１４分