Filter
Top Products
221
SEQUENCE
Common items in all screens SEQUENCE SONG SETUP INSTRUMENTS AUDIO PHRASES
PIANO ROLL EDIT screen
Here you can edit the MIDI messages that are
recorded on a MIDI track. The piano roll graphically
indicates the pitch, duration, and velocity.
To access this screen
•
➜
In order to open this popup, you must specify a
MIDI track as the current track.
Explanation of each area
1.
Note number (keyboard)
The note numbers (keys) are shown from bottom to
top. Since the actual pitches correspond to the note
numbers, the displayed location of the note tells you
the pitch.
2.
Step Time
This is the unit by which the current time will move
when you press the step buttons ( / ).
3.
Editing Region
Displays the editing region (region in time~out time).
4.
Piano roll
This shows the note events. The horizontal axis is
time, and the vertical axis is note number (pitch). You
can change the note number or time location by
moving the displayed note event.
5.
Velocity
Indicates the velocity of the note event. The velocity is
shown as a pair with the note event; a longer bar
indicates a stronger velocity.
F-buttons
Note Sel (Note select)
Selects/de-selects the note number at the note cursor.
If an In time and Out time are specified for the
selected note number, the note numbers existing
within that time range will be selected.
All Note Sel (All note select)
Selects/de-selects all note numbers. If all note
numbers are selected, and an In time and Out time
are specified, all note numbers existing in that time
region will be selected.
Rgn In/Out (Region In/Out)
Specifies the editing region. Press this once to set the
beginning (In time) of the editing region, or once
again to set the end (Out time) of the editing region. If
you press it yet again, the beginning (In time) of the
editing region will again be set.
Command
Displays the
SELECT PIANO ROLL EDIT
COMMAND popup
(p. 224).
ECS05_manual_e.book 221 ページ ２００５年１１月３０日 水曜日 午前１１時１４分