Filter
Top Products
370
IMPORT
QUICK ASSIGN (PATCH:S-700 PARTIAL) screen
Here you can assign the S-700 series partial data to a
patch.
To access this screen
•
➜
(In
IMPORT screen
(p. 366), select
an S-700 series partial data)
Explanation of each area
1.
Partial Name
Displays the S-700 series partial name you want to
import.
2.
Pads
Indicates the status of the pads in the current pad
bank.
3.
Part Number
Specifies the instrument part to which you want to
assign the sampled data.
Range:
1
~16
4.
Assign To
Specifies the partial (note number) within the
instrument part selected by Part Number to which
the sample data will be assigned. The value at the left
specifies the lowest note, and the value at the right
specifies the highest note. The center value specifies
the original key.
Range: 1-01 (A0)~(
lowest vacant note number
)
~6-16 (G#8)
You can also specify the assignments by striking a
pad directly. If you strike a pad to which a sound is
already assigned, that sound will play.
• If a range of pads (note numbers) are assigned, they
will play the same partial. This means that if you
edit the partial parameters, your editing will affect
the sound of all pads that use that partial. The
PATCH EDIT (SPLIT) screen
(p. 273) shows how
partials are assigned to the pads.
• The imported partial data contains information
indicating the original key. This means you don't
need to specify the original key.
5.
Keyboard
Indicates how the note numbers are used.
F-buttons
Name
Displays the
EDIT NAME popup
(p. 199), where you
can edit the pad name.
Set
Assigns the sample data to the specified pad.
Indicate
Status
A partial is assigned to the pad.
Nothing is assigned.
Samples
will be assigned
Region
of used
note numbers
ECS05_manual_e.book 370 ページ ２００５年１１月３０日 水曜日 午前１１時１４分