Filter
Top Products
118
Playing your songs
Editing a locate point
You can edit the location of a locate point you stored.
1.
Press .
The
SEQUENCE screen
(p. 205) will appear.
2.
Press .
The
LOCATOR popup
(p. 251) will appear.
3.
Move the cursor to the locate number (0~9) that you want to edit.
4.
Press (Edit).
The
LOCATOR EDIT popup
(p. 251) will appear.
5.
Move the cursor to the measure, beat, and tick, and edit the location as
desired.
6.
Press (Set).
The locate point will be assigned to the new time you specified.
Changing the playback tempo of the song
Here's how to change the playback tempo of the entire song.
1.
Press .
The BPM/TAP popup will appear.
If the Tempo Track parameter (p. 257) is On, the
song will play back according to the tempo
track. This means that if you want to use
[BPM/TAP] to set the tempo, you must first
turn the Tempo Track parameter Off. If you press [BPM/TAP] when the Tempo Track
parameter is On, the TEMPO TAP popup will indicate [F5 (T.Track Off)].
You can turn the
Tempo Track parameter Off by pressing [F5 (T.Track Off)].
2.
Turn the VALUE dial or press / to set the playback tempo.
3.
When you have finished making the setting, press .
If you want the song to always
play at a specific tempo, record
the tempo setting in the tempo
track (p. 257), and turn the
Tempo Track parameter On.
ECS05_manual_e.book 118 ページ ２００５年１１月３０日 水曜日 午前１１時１４分