Filter
Top Products
42
Sampling
Other ways to sample
Applying effects while you sample
You can apply an effect directly to the input source while you sample. For details, refer
to
Sampling through MFX
(p. 125).
Sampling the sound played by the MV-8000
You can sample the sound that is being sent from the MV-8000's mix bus. This is called
“resampling.”
1.
Access the SAMPLING screen as described in steps 1~3 of
Using a
sampled sound as an audio phrase or patch
(p. 38).
2.
Press (Re-Sample).
The SAMPLING screen will change to
RE-SAMPLING screen.
3.
Proceed with sampling as described in step 5
of
Using a sampled sound as an audio
phrase or patch
(p. 38).
The rest of the procedure is the same. The sound
produced by the MV-8000 will be recorded while sampling continues.
Simply save the data after sampling, and let me decide later how to
use it
Here's what to do if you simply want to collect your audio source materials without
stopping to assign the samples as audio phrases or patches.
1.
Access the SAMPLING MENU screen as described in steps 1~2 of
Using a
sampled sound as an audio phrase or patch
(p. 38).
2.
Press (Sample), or use the cursor to
select the SAMPLE icon and press .
The
SAMPLING / RE-SAMPLING screen
(p.
355) will appear.
3.
Proceed with sampling as described in steps
4~7 of
Using a sampled sound as an audio
phrase or patch
(p. 38).
After sampling, the
SAMPLING RESULT
(SAMPLE) popup
(p. 359) screen will appear.
4.
Set the parameters as desired.
Set the Start Point and End Point parameters, and
other options as desired.
5.
Press (Keep).
The sample will be saved in the sample list with the
parameter settings you specified.
Importing sample data of another format
WAV files or AIFF files from your computer can be imported into the MV-8000 and
used as source material. For details, refer to
Using WAV/AIFF audio files
(p. 154).
You can sample the sound that
has been sent through an
effect, or sample the sound of
multiple samples played
simultaneously.
Since the external audio input
(analog or digital) is active
even while resampling, you
can mix these sources for
resampling.
WAV files are the standard
two-channel PCM audio file
format used by Microsoft
Windows.
ECS05_manual_e.book 42 ページ ２００５年１１月３０日 水曜日 午前１１時１４分