Filter
Top Products
137
Project and disk management
Project and disk managementCreating an audio CD Using the MV8-OP1 (Audio I/O
Expansion) to connect external devices
Using data of other formats Using the MV-8000 with MIDI or V-LINK
devices
Naming a project
Here's how you can assign a name to your project for easier management.
1.
Load the project that you want to name as described in
LOAD PROJECT
screen
(p. 315).
After the project has been loaded, the
SEQUENCE screen
(p. 205) will appear.
2.
Press .
The
PROJECT MENU screen
(p. 308) will appear.
3.
With the cursor located in the upper row of
icons, press (Name). Alternatively, select
the NAME icon and press .
The
EDIT PROJECT NAME
(p. 199) will appear.
Enter the desired name. For details on entering text,
refer to p.9.
4.
When you've finished entering the name, press (OK).
Protecting a project
Here's how you can protect a project so that it cannot be accidentally deleted or
overwritten.
1.
Press .
The
PROJECT MENU screen
(p. 308) will appear.
2.
With the cursor located in the upper row of icons, press (Protect).
Alternatively, select the PROTECT icon and press .
The
SET PROJECT PROTECTION screen
(p. 310) will appear. The display will list
the projects saved on the hard disk.
3.
Move the cursor to the project that you want to protect, and press
(Protect On).
The project will be protected. You can press [F5 (Protect Off)] to turn off the protect
setting.
Changes you make to the
project name apply to the
current project.
You can assign a name of up to
twelve characters.
ECS05_manual_e.book 137 ページ ２００５年１１月３０日 水曜日 午前１１時１４分