Filter
Top Products
121
Using effects
Using effectsEditing a songCreating a song (Song Recording) Playing your songs Adjusting the balance of your song and
mastering it
Selecting an effect
Selecting an effect from the effect library
Each of the MV-8000's three internal effect processors has its own effect library. You
can switch effect settings by selecting various effects from the effect library.
1.
Perform steps 1~2 of
Switching the effects on/off
(p. 120).
2.
Press (Library).
The
EFFECT LIBRARY popup (MFX/DlyCho/Reverb)
(p. 374) will appear.
The screen that appears will depend on the current effect.
3.
Turn the VALUE dial or use / to select the effect you want to use.
4.
Press (Use This).
The effect will switch to the one you selected.
Current
effect
Screen that appears
MFX
MFX LIBRARY screen (p. 374)
Dly/Cho DELAY/CHORUS LIBRARY screen (p. 374)
Reverb REVERB LIBRARY screen (p. 374)
You can press [F4 (Preview)] to
audition the selected effect.
Indicates “Library Preview
On.” To cancel auditioning,
press [F4 (Preview)] once
again.
For details on the number and
type of effects in the effect
library, refer to Libraries (p.
28).
ECS05_manual_e.book 121 ページ ２００５年１１月３０日 水曜日 午前１１時１４分