Filter
Top Products
51
Editing a sampled sound
Editing a sampled soundMain FeaturesContents Parts of the MV-8000 and what they do Sampling
Editing a patch
Here's how you can modify a patch in various ways.
Accessing the Patch Edit screen
1.
Press .
The INSTRUMENTS screen will appear.
2.
Use (up/down) to select the part that
you want to view.
The selected part number (the current part) will be
highlighted.
3.
Press (Patch Edit).
The
PATCH EDIT screen
(p. 269) will appear.
To adjust the pitch of the patch
➜
adjust the Pitch Coarse, and Pitch Fine parameters.
To adjust the tone (brightness) of the patch
➜
adjust the Filter parameters Cutoff Offset and Resonance Offset.
To adjust the way in which the volume of the patch
changes over time
➜
adjust the Amplifier parameters Attack Offset and Release Offset.
Your edits will be lost when you turn off the power. If you want to keep your edits, save the
project before you turn off the power.
INSTRU-
MENTS
Selects
the part.
Specifies what will happen
when the same partial
is played.
Adjusts
the velocity sensitivity.
Adjusts
the pitch.
Specifies
the pitch bend
range.
Adjusts
the brightness
of the sound.
Adjusts the way in
which the volume
will change over time.
Raising the Resonance Offset
value excessively may produce
oscillation, making the sound
distort.
ECS05_manual_e.book 51 ページ ２００５年１１月３０日 水曜日 午前１１時１４分