Filter
Top Products
259
SONG SETUP
Common items in all screens SEQUENCE SONG SETUP INSTRUMENTS AUDIO PHRASES
SYNC screen
Here you can make synchronization settings.
To access this screen
•
➜
(move the cursor to the upper line of
icons)
➜
Explanation of each area
1.
MIDI Clock Output
Selects the connector (MIDI OUT A, MIDI OUT B, or
R-BUS) from which MIDI Clock will be transmitted
(output).
The R-BUS connector is available if the MV8-OP1
(sold separately) is installed.
2.
MMC Mode
Specifies the device that will be remotely controlled
via MMC (MIDI Machine Control).
3.
MMC Output
Specifies the connector from which MMC will be
output (transmitted) when MMC Mode = Master.
The R-BUS connector is available if the MV8-OP1
(sold separately) is installed.
4.
MTC Frame Rate
Specifies the format of the MTC transmitted (output)
by the MV-8000.
5.
MTC Offset Time
Specifies the time difference between the sequencer
time and the MTC timing when the MV-8000 is
MTC-synchronized from an external device.
Range:
00h00m00s00f
~23h59m59s##f
6.
MTC Output
Specifies the connector from which MMC will be
output (transmitted) when MMC Mode = Master.
7.
Remote (MIDI In)
Specifies whether the Start/Stop message (MMC)
received from an external MIDI device will be
controlled the sequencer
Range:
Off
, On
Parameters
Value
MIDI OUT A
Off
, On
MIDI OUT B
Off
, On
R-BUS
Off
, On
Value
Explanation
Master
The MV-8000 will transmit MMC to
control other connected devices.
Slave (MIDI) The MV-8000 will receive and be
controlled by MMC transmitted by
another connected device.
Slave (R-BUS)
Parameters
Value
MIDI OUT A
Off
, On
MIDI OUT B
Off
, On
R-BUS
Off
, On
Value
Explanation
30
30 frames per second
29.97ND 29.97 frames per second, non-drop
29.97D 29.97 frames per second, drop-frame
25 25 frames per second
24 24 frames per second
Parameters
Value
MIDI OUT A
Off
, On
MIDI OUT B
Off
, On
R-BUS
Off
, On
ECS05_manual_e.book 259 ページ ２００５年１１月３０日 水曜日 午前１１時１４分