Roland MV-8000 Stereo Equalizer User Manual


 
351
MASTERING
PROJECT SYSTEM DISK/USB MASTERING SAMPLING
CUE SHEET screen
Here you can specify the song order in which the
audio files will be written to the CD-R/RW disc.
To access this screen
Explanation of each area
1.
Cue sheet
This lists the song order of the audio files that you
will write to the CD-R/RW disc.
2.
Name
Displays the names of the audio files that will be
written to the CD-R/RW disc.
3.
Ext (Extension)
This is part of the filename, and is used to indicate the
type of file. The mastering file list shows files with a
.WAV extension.
4.
Time
Indicates the absolute time from the beginning of the
CD-R/RW disc that will be written.
5.
Length
Indicates the length of each audio file.
6.
PreGap
Indicates the time between songs.
7.
Volume of the total audio files
Indicates the size of the audio file that you will write
to the CD-R/RW disc.
F-buttons and menu
Insert
Displays the
SELECT MASTERING SOURCE /
SELECT AUDIO FILE popup
(p. 340), where you can
select an audio file that you want to write to CD and
add it to the cue sheet at the cursor location. Songs
following the cursor location will be moved back.
Delete
Deletes (removes) an unwanted audio file from the
cue sheet. The file highlighted by the cursor will be
deleted from the cue sheet.
Deleting a file from the cue sheet does not delete the
file itself from the hard disk.
Move
(Move up)
Exchanges the file highlighted by the cursor in the
cue sheet with the file above it.
Move
(Move down)
Exchanges the file highlighted by the cursor in the
cue sheet with the file below it.
Write CD
Starts the writing operation to CD.
The write speed will decide automatically on the
type of media inserted in the CD-R/RW drive.
MENU
Displays the cue sheet menu.
Menu items
Gap Time
Displays the
GAP TIME popup
(p. 352).
ECS05_manual_e.book 351 ページ 2005年11月30日 水曜日 午前11時14分