Filter
Top Products
147
Project and disk management
Project and disk managementCreating an audio CD Using the MV8-OP1 (Audio I/O
Expansion) to connect external devices
Using data of other formats Using the MV-8000 with MIDI or V-LINK
devices
Moving a file to another location (Move)
Here's how to move a folder or file on disk to another folder or drive.
1.
Use the cursor to select the file that you want to move.
2.
Press (Command).
The
SELECT FILE COMMAND menu
(p. 332) will appear.
3.
Choose “Move” and press (Select).
The
SELECT DESTINATION FOLDER popup
(p. 333) will appear.
4.
Select the move-destination folder and press (Execute).
You must never move a folder other than those described in
Folder structure
(p.
142). Such folders and files are used by the MV-8000's system. If you move them, the
system will not operate correctly, and important data will be lost.
If you want to move the file or folder to another drive in step 4, or if you want to create another
folder and then move the data into it, perform the following procedure first, and then return to
step 4 and continue.
• If you want to move the data to a different drive, press [F1 (Select Drive)]. The
SELECT DRIVE popup
(p. 203) will appear. Use the cursor to select a drive, and
press [F5 (SELECT)].
• If you want to create another folder, press [F4 (Make Folder)]. The
EDIT FOLDER
NAME
(p. 199) will appear. Input a name for the folder and press [F5 (OK)].
ECS05_manual_e.book 147 ページ ２００５年１１月３０日 水曜日 午前１１時１４分