Filter
Top Products
361
SAMPLING
PROJECT SYSTEM DISK/USB MASTERING SAMPLING
QUICK ASSIGN (AUDIO PHRASE:DIVIDE) screen
When you set the Auto Divide parameter to On, here
you can assign divided audio phrases to pads.
To access this screen
•
➜
➜
(Set the Auto Divide parameter
to On)
➜
(start sampling)
➜
(stop
sampling)
➜
Explanation of each area
1.
Sample Name
Displays the name of the sample.
2.
Sample Channel
Displays the number of channel of the sample
(Mono/Stereo).
3.
Wave window
Displays the beginning of the divided sampled data
(waveform).
4.
Pads
Indicates the state of the pads in the current pad
bank.
5.
Assign To Pad Bank
Selects the pad bank to which the sample will be
assigned.
Range:
1
~32
F-buttons
Name
Displays the
EDIT NAME popup
(p. 199), where you
can edit the pad name.
Set All
Assigns the sample to the pad number 1 of the
specified pad banks.
When automatically assigning samples, a
confirmation message will appear if a pad to which
a sample is already assigned would be overwritten.
If the waveform was not divided even though Auto
Divide was on, [F4 (Preview)] (p. 360) will be
displayed.
EXIT
Returns to the
SAMPLING / RE-SAMPLING screen
(p. 355) without assigning the sample data to a pad,
and displays the next sample data.
Indicate
Status
An audio phrase is assigned to the pad.
Nothing is assigned.
An audio phrase will assign to the
enclosed pad.
ECS05_manual_e.book 361 ページ ２００５年１１月３０日 水曜日 午前１１時１４分