Roland MV-8000 Stereo Equalizer User Manual


 
320
SYSTEM
GLOBAL screen
Here you can make settings for the overall system of
the MV-8000.
To access this screen
(move the cursor to the upper row of
icons)
Explanation of each area
1.
Input Select
Selects the input source for sampling or recording.
If the MV8-OP1 (sold separately) is not installed,
this will be fixed at Analog (the COAXIAL,
OPTICAL, and R-BUS icons are not displayed).
2.
Master Tune
Adjusts the overall tuning of the MV-8000. The
displayed value is the frequency of the A4 key
(middle A).
Range: 415.3~
440.0
~466.2
If an audio phrase whose Tempo Sync parameter is
Off has been recorded on an audio track, adjusting
the Master Tune parameter will cause the playback
timing to drift.
3.
Preview Length
Specifies the playing time for Preview Playback
([TO]/[FROM]) in steps of 0.1 seconds.
Range: 0.1~
1.0
~10.0
4.
Digital Output Select
Selects the audio signal that will be output from the
DIGITAL output jack.
5.
Digital Out Copy Protect
Allows you to prohibit subsequent digital copying
from media that you digitally recorded from the
MV-8000 onto a digitally-connected MD recorder or
similar device.
6.
R-BUS Word Clock
Selects the clock by which the MV-8000 will operate
when it is connected to an external device via R-BUS.
Value
Sampling source
Analog
Analog input from the PHONO
jacks or MIC/LINE jacks
Coaxial Coaxial digital input
Optical Optical digital input
R-BUS
Digital input from R-BUS (channels
1 and 2)
Value
Output signal
Master
The same signal as the Master out-
put will be output.
MLT1/2
The multi output bus 1/2 signal will
be output.
: :
MLT7/8
The multi output bus 7/8 signal will
be output.
Value
Explanation
Off
The digital output jack will output a sig-
nal without copy-protect flags.
On
The digital output jack will output a sig-
nal with copy-protect flags. It will not be
possible to copy this data from the re-
corded media via a digital connection
onto an MD or DAT.
Value Explanation
Internal
The MV-8000 will use its own inter-
nal clock.
External
The MV-8000 will use the clock from
the external device connected via
R-BUS.
ECS05_manual_e.book 320 ページ 2005年11月30日 水曜日 午前11時14分