Filter
Top Products
36
Parts of the MV-8000 and what they do
1.
MIDI (IN/OUT A/OUT B)
Use these connectors to transmit/receive MIDI messages to or from other MIDI
devices.
2.
VGA OUTPUT/MOUSE option slot
This is a slot for installing an option that allows a VGA monitor and mouse to be
connected. You can install the MV8-VGA VGA/mouse expansion (sold separately) in
this slot. In order to use a VGA monitor and mouse, you will need the version 2.0 or
later software that will be available in the near future.
3.
Cooling fan vent
The MV-8000 contains a cooling fan that prevents the internal temperature from
becoming too high. The warm air is exhausted from this vent.
4.
POWER switch
Turns the power on/off.
5.
AC inlet
Connect the included power cable here.
VGA OUT/MOUSE (OPTION)
Do not open the option
slots until you are ready to
install the corresponding
option.
Do not place any
obstructing object in front
of the cooling fan vent.
Doing so may make the
MV-8000 overheat, causing
malfunctions.
ECS05_manual_e.book 36 ページ ２００５年１１月３０日 水曜日 午前１１時１４分