Filter
Top Products
438
Effect Block
Reverb effect
Reverb
This is a basic reverb.
Adds reverberation to the sound,
modeling an acoustic space
.
1.
Room Size
Value: 5~40 m
Sets the size of the room. For example, the setting
“10m” gives you reverb as it would sound in a single
space 10 meters wide.
2.
Time
Value: 0~127 sec
Sets the reverb time in seconds.
3.
HF Damp (High Frequency Damp)
Value: 200~8000 Hz, Bypass
Adjusts the frequency above which the
high-frequency content of the reverb sound will be
cut, or “damped.” If you do not want to cut the high
frequencies, set this parameter to Bypass.
4.
Delay Feedback
Value: 0~127
Adjusts the amount of delay feedback when the Type
setting is Delay or Pan-Delay.
ECS05_manual_e.book 438 ページ ２００５年１１月３０日 水曜日 午前１１時１４分