Filter
Top Products
88
Editing a song
Selecting the song that you want to edit
In order to edit a song, that song must be the current song. If you want to edit a song
that is saved in a different project, you must first load that project, and then select the
song.
Selecting a song from the current project
1.
Press .
The
SONG SETUP MENU screen
(p. 256) will appear.
2.
With the cursor located in the upper row of icons, press (Select Song).
Alternatively, you can select the SELECT SONG
icon and press .
The
SELECT SONG screen
(p. 262) will appear.
3.
Use (up/down) or the VALUE dial to
select the song that you want to edit.
4.
Press (Execute).
The selected song will become the current song, and the SEQUENCE screen will
appear.
Selecting a song from a different project
1.
Press .
The
PROJECT MENU screen
(p. 308) will appear.
2.
With the cursor located in the lower row of icons, press (Load).
Alternatively, you can select the LOAD icon and
press .
The
LOAD PROJECT screen
(p. 315) will appear.
The contents of the project folder will be displayed.
3.
Use (up/down) or the VALUE dial to
select the project that contains the song you
want to edit.
4.
Press (Execute).
The selected project will be loaded, and will become the current project. The song that
is selected is the song that was the current song when the project was last saved. To
switch to the song you want to edit, use the procedure described in
Selecting a song
from the current project
(p. 88).
If you turn off the power or
switch to a song of a
different project, the
contents of the current song
will be lost. If the current
song contains data you
want to keep, save the
project before you continue
(p. 138).
The data in the MV-8000's
internal memory is
preserved even if you
switch the current song.
However if you switch
projects, the contents of
internal memory will be
lost.
When you switch the current
project, a message of “Save
current project?” will appear.
If you press [F5 (Yes)], the
current project will be saved
b
efore the selected project is
loaded. If you press [F1 (No)],
the selected project will be
loaded without saving the
current project.
ECS05_manual_e.book 88 ページ ２００５年１１月３０日 水曜日 午前１１時１４分