Roland MV-8000 Stereo Equalizer User Manual


 
441
MIDI Implementation
Preset patches and Algorithm list Effect Block MIDI Implementation Specifications Index
Volume (Controller number 7)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Volume: 00H - 7FH (0 - 127)
Panpot (Controller number 10)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Panpot: 00H - 40H - 7FH (Left - Center - Right),
Expression (Controller number 11)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Expression: 00H - 7FH (0 - 127)
Hold 1 (Controller number 64)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
Portamento (Controller number 65)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
Resonance (Controller number 71)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv= Resonance value (relative change):00H - 40H - 7FH (-64 - 0 - +63)
Release Time (Controller number 72)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Release Time value (relative change):00H - 40H - 7FH (-64 - 0 - +63)
Attack time (Controller number 73)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Attack time value (relative change):00H - 40H - 7FH (-64 - 0 - +63)
Cutoff (Controller number 74)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Cutoff value (relative change):00H - 40H - 7FH (-64 - 0 - +63)
General Purpose Controller 5 (Controller number 80)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
General Purpose Controller 6 (Controller number 81)
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
General Purpose Controller 7 (Controller number 82)
n = MIDI channel number:0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
General Purpose Controller 8 (Controller number 83)
n = MIDI channel number:0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
Portamento control (Controller number 84)
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = source note number: 00H - 7FH (0 - 127)
Channel Pressure
n = MIDI channel number:0H - FH (ch.1 - 16)
vv = Channel Pressure: 00H - 7FH (0 - 127)
Channel Mode Messages
MONO (Controller number 126)
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm = mono number: 00H - 10H (0 - 16)
POLY (Controller number 127)
n = MIDI channel number: 0H - FH (ch.1 - 16)
System Realtime Messages
Active Sensing
* This message is transmitted at intervals of approximately 250 msec.
* This message is not sent when Transmit Active Sensing parameter (SYSTEM/MIDI) is
OFF.
Status
2nd byte 3rd byte
BnH
07H vvH
Status
2nd byte 3rd byte
BnH
0AH vvH
Status
2nd byte 3rd byte
BnH
0BH vvH
Status
2nd byte 3rd byte
BnH 40H vvH
Status
2nd byte 3rd byte
BnH
41H vvH
Status
2nd byte 3rd byte
BnH
47H vvH
Status
2nd byte 3rd byte
BnH
48H vvH
Status
2nd byte 3rd byte
BnH
49H vvH
Status
2nd byte 3rd byte
BnH
4AH vvH
Status
2nd byte 3rd byte
BnH
50H vvH
Status
2nd byte 3rd byte
BnH
51H vvH
Status
2nd byte 3rd byte
BnH
52H vvH
Status
2nd byte 3rd byte
BnH
53H vvH
Status
2nd byte 3rd byte
BnH 54H kkH
Status
2nd byte
DnH
vvH
Status
2nd byte 3rd byte
BnH
7EH mmH
Status
2nd byte 3rd byte
BnH
7FH 00H
Status
FEH
ECS05_manual_e.book 441 ページ 2005年11月30日 水曜日 午前11時14分