Filter
Top Products
8. OPERATION PROCEDURES FOR THE SYSTEM MONITOR FUNCTION
8 - 1
MELSEC
GOT
Chapter8 Operation procedures for the system monitor function
The operation procedures for using the system monitor function are explained in this
section.
8.1 Operation procedures before starting system monitoring
This section contains a summary of the procedure for transmitting the system program
(OS) for the system monitor function from the Personal computer to the GOT until it is
installed in the built-in memory.
For details, please refer to the Help in the drawing software. Details of the screen
display and key operation are shown in the Help.
Start
Connect GOT to Personal computer.
Start up Personal computer and drawing
software.
With the drawing software, transmit the
system program (OS) for the system monitor
function from the Personal computer to the
GOT and install it in the built-in memory.
When installation is finished, the system
monitor can be operated through the GOT.
Transmit the data using the installation dialog box.
When installation is finished, "Completed" is displayed
on the installation dialog box.
Start up GOT.
Drawing software operation is finished.
End
It is not necessary to set up and operate the GOT
after startup.
!!!
!!!
!!!
Proceed to Section 8.2 to operate the screen monitor.
!!!
8