Filter
Top Products
12. OPERATION OF EACH SPECIAL MODULE MONITOR SCREEN
12 - 58
MELSEC
GOT
No. Contents of display
Buffer memory address
to reference (decimal)
11)
The error code is displayed when an error occurs that can be handled by a
sequence program such as a startup data error or BUSY in progress.
104
12)
The error code is displayed when an error occurs that causes monitoring to
stop due to an external signal when starting or when a startup is in progress.
105
13) The change value (PLS) of the current value is displayed. 80, 81
14) The change value (PLS) of the speed/position/travel distance is displayed. 88, 89
15) The change value of the velocity change is displayed. 82, 83
16) The set value of the JOG velocity is displayed. 84, 85
17) The set value (PLS) of the upper stroke limit is displayed. 0, 1
18) The set value (PLS) of the lower stroke limit is displayed. 2, 3
19)
The command pulse ratio numerator (CMX) and denominator (CDV) are
displayed.
4, 5
20) The set value of the velocity limit is displayed. 20, 21
21) The set value of the acceleration time is displayed. 22
22) The set value of the deceleration time is displayed. 23
23) The set value (PLS) of the in-position range is displayed. 24
24)
The set status of the positioning mode is displayed.
0: Positioning 1: Velocity positioning
25