Filter
Top Products
4. OPERATING THE UTILITY FUNCTION
4 - 5
MELSEC
GOT
4.4 Copying the monitor data/OS data between the internal memory and memory card (Screen & OS copy)
(1) Display screen
Sample screen
(2) Features
•
Project data stored in the internal memory can be saved to the memory card.
•
Project data stored in the memory card can be saved to the internal memory.
•
OS data can be backed up by copying them from the internal memory to the
memory card.
(3) Procedure
(a) Basic operation
•
Touch
or to select options.
•
Touching
will display a message asking you to answer the question
"Do you want to execute?"
•
If you answers Yes to the question, touch
again. Touch or to
select another option. To quit the backup copy, touch
to return to the
Utility Menu screen.
(b) To return to the Utility Menu screen:
•
Touch
to return to the Utility Menu screen.
(4) On-screen error messages
Message Cause Corrective Action
Cancel write protect
function
The memory card is write-protected.
Release write protection of
the memory card.
Install memory card
A memory card is not installed on the
GOT.
Install a memory card on
the GOT.
Format memory card
The installed memory card is not yet
formatted.
Format the memory card.
Write Error (M-CARD
capacity shortage)
Data transfer error
Memory card loaded has memory
space less than written data.
Change the memory card
for the one having enough
memory space.
M-CARD error Data
transfer error
Write error occurred in the memory
card during copying, or the memory
card used has no free space.
Change the memory card,
or increase the free space
of the memory card.
Memory card error
The hardware of the installed
memory card is defective.
Replace the memory card
with a new one.