Filter
Top Products
9. OPERATION OF THE VARIOUS SYSTEM MONITOR SCREENS
9 - 10
MELSEC
GOT
9.3 Batch monitor
When monitoring, the function of specifying the device at the beginning of an optional
device range and monitoring it is called the "batch monitor".
The batch monitor operation when executing the system monitor is explained below.
9.3.1 Basic operation
The batch operation procedure is shown below.
See Sec. 9.1.1.
Select "Batch Monitor" with the basic screen.
[Operation procedure]
TEST
MENU
FORM
SET
PRESS "SET" KEY, SELECT
ITEM THEN ENTER DEVICE
TYPE & NO.
NETWK No.[ 0] STATION[FF]
Specify the first monitor device.
When reading is complete, display the Batch
Monitor screen.
D 10 32767 D 18 -500
D 11 0 D 19 3234
D 12 0 D 20 0
D 13 -1 D 21 0
D 14 0 D 22 0
D 15 3 D 23 -32768
D 16 0 D 24 0
D 17 0 D 25 0
NETWK No.[ 0] STATION[FF]
BATCH MONITOR
TEST MENU FORM
SET
Change the screen display.
......When a screen other than the basic screen is displayed,
touch
MENU
at the top of the currently displayed screen,
display the basic screen, and select "Batch monitor".
......When you touch
MENU
, you return to the basic screen.
When you touch
FORM
, you can change this display
(See Sec. 9.1.2.).
When you touch
SET
, the monitor station and device
can be specified (See Sec. 9.1.3.)
(1) Specify the station and device to be monitored.
For the method of specifying, see Sec. 9.1.3.
......Do if needed.
For the display change method, see Sec. 9.1.2.