Filter
Top Products
9. OPERATION OF THE VARIOUS SYSTEM MONITOR SCREENS
9 - 12
MELSEC
GOT
9.4 TC Monitor (monitor of timer and counter)
The function that monitors only the time (T) and counter (c) when monitoring is called
the TC monitor.
The TC monitor operation when executing the system monitor is explained below.
9.4.1 Basic operation
The TC operation procedure is shown below.
See Sec. 9.1.1.
Select "TC Monitor" with the basic screen.
[Operation procedure]
TEST MENU FORM SET
PRESS "SET" KEY, SELECT
ITEM THEN ENTER DEVICE
TYPE & NO.
NETWK No.[ 0] STATION[FF]
Specify the initial monitor device.
When reading is complete, display the TC
Monitor screen.
T 0 PV 0 SV 0
T 1 PV 0 SV 0
T 2 PV 150 SV 150
T 3 PV 0 SV 0
T 4 PV 0 SV 0
T 5 PV 25 SV 200
T 6 PV 100 SV 300
T 7 PV 0 SV 0
NETWK No.[ 0] STATION[FF]
TC MONITOR TEST MENU FORM SET
Change the screen display.
......When a screen other than the basic screen is displayed,
touch
MENU
at the top of the currently displayed screen,
display the basic screen, and select "TC Monitor".
......When you touch
MENU
, you return to the basic screen.
When you touch
FORM
, you can change this display
(See Sec. 9.1.2.).
When you touch
SET
, the monitor station and device
can be specified (See Sec. 9.1.3.).
(1) Specify the station and devised to be monitored.
For the method of the specifying, see Sec.9.1.3.
......Do if needed.
For the display change method, see Sec. 9.1.2.