Filter
Top Products
1. OVERVIEW
1 - 14
MELSEC
GOT
1.3.5 Features of the network monitor function
To use the network monitor function, you first must install an operating system (OS)
for the network monitor function on your GOT by using drawing software. This enables
you to monitor the status of the MELSECNET/B, MELSECNET (II), and
MELSECNET/10 networks. The following describes the features of the network
monitor function.
(1) Network monitor screens are selectable on the own station monitor screen to
monitor the own station and other stations on a network.
The own station monitor screen enables you to monitor the status of all the
network lines connected to the own station.
A touch of the screen will guide you through various monitor screens to monitor
the status of the own station and other stations on a network.
(2) Network information can be obtained from the own station monitor screen.
Dedicated monitor screens are available for each category of station classification,
depending on the role that is played by the own station.
Network category: MELSECNET/B, MELSECNET (II) master station
MELSECNET/B, MELSECNET (II) local station
MELSECNET/10 control station/ordinary station
MELSECNET/10 remote master station
(Sample display) MELSECNET/B, MELSECNET (II) master station