Filter
Top Products
9. OPERATION OF THE VARIOUS SYSTEM MONITOR SCREENS
9 - 8
MELSEC
GOT
9.2.2 Entry monitor screen display and key functions
In this section, the Entry Monitor screen display and the functions of the keys
displayed at the top of the screen are explained.
(1) Display
1)
2)
3)
D 200 30
[Line 1 current units]
W 200 43
[Production line A ]
R 50 68378428 DW
[link status ]
X 3
!
[Input switch 3 ]
NETWK No.[ 0] STATION[FF]
DEVICE MONITOR
TEST
MENU
FORM
SET
When comment is not displayed: max. 8 devices
When comment is displayed : max. 4 devices
Display when system monitoring
#
Bit device
#########!
:
ON
"
: OFF
#
Word device
#####
Current value
1)
Displays the keys that are used with the operation of the Entry Monitor screen
shown in (2) (Touch input).
2) Displays the monitor station network No. and station No.
3) Displays the status and current value of the device.
(2) Key functions
The chart below shows the functions of the keys that are used with the Entry
Monitor screen operation.
Key Function
MENU
Move to basic screen (function change menu screen) to change to
another monitor function or ending the system monitor (See Sec.
9.1.1.).
FORM
Move to the display change menu screen to change the numerical
display on the Entry Monitor screen (decimal, hexadecimal) or
changing the comment display (on/off) (See Sec. 9.1.2.).
SET
Move to device setting menu screen to enter the monitor device,
delete the device, or execute a test.
•
Entry of monitor device (See Sec. 9.1.3.)
•
Deletion of entry device (See Sec. 9.2.3.)
•
Test (See Sec. 9.6.)
Scroll the display up or down one line, and display the monitor device
that is not displayed (just before or after the current display).
When five or more monitor devices are entered, operation is enabled
when the monitor device comment is displayed.
: Scrolls down one line.
: Scrolls up one line.