Filter
Top Products
9. OPERATION OF THE VARIOUS SYSTEM MONITOR SCREENS
9 - 19
MELSEC
GOT
9.6.2 Quick test function
In addition to the existing tests for the direct input of device, station No., etc. during
monitoring with the system monitor function, this function enables the bit device
SET/RESET, word device, buffer memory data to change by a single touch.
1) Operation to set the quick test function on
To perform the quick test functions, perform the following operations:
Display one of the system monitor screen.
[Operation procedure]
D 15 -2147483648 DW
ZR 1042431 -32767
X 0001
!
M 25
"
W 200 43
R 50 68378428 DW
D 0 0
W 100 0
NETWK No.[ 0] STATION[FF]
DEVICE MONITOR TEST MENU FORM SET
TEST
(Touch)
D 15@ -2147483648@ DW
ZR 1042431 @ @@ -32767
X 0001@ @ œ
M 25@ @ ›
W 200@ @ 43
R 50@ @ 68378428 DW
D 0@ @ 0
W 100 0
NETWK No.[ 0] STATION[FF]
DEVICE MONITOR
TEST MENU FORM SET
QUICK TEST MODE SET
O K
O K
D 15 -2147483648 DW
ZR 1042431 -32767
X 0001
!
M 25
"
W 200 43
R 50 68378428 DW
D 0 0
W 100 0
NETWK No.[ 0] STATION[FF]
DEVICE MONITOR
TEST MENU
FORM SET
......When displaying the device monitor screen.
......The quick test is turned on by clicking on
OK
.
......Status when the quick test function is on.