Filter
Top Products
12. OPERATION OF EACH SPECIAL MODULE MONITOR SCREEN
12 - 18
MELSEC
GOT
12.8 A1S62RD module monitor
12.8.1 Operation monitor
8)
9
)
4)
5)
10
)
1) 2) 3)
6) 7)
No. Contents of display
Buffer memory address
to reference (decimal)
1)
The temperature detection value of each channel is displayed up to 1 digit
after the decimal point.
10, 11
2)
The temperature detection value of each channel is displayed up to 3 digits
after the decimal point.
18 to 21
3)
The values set for the time and count of times for averaging processing of
each of the channels is displayed.
2, 3
4)
The specified conversion enabled/disabled status of each channel is
displayed.
0
5) The Conversion Completed flag status for each channel is displayed. 35
6)
The specified status for the averaging processing/sampling processing of
each channel is displayed.
1
7)
The specified status for the averaging processing of each channel is
displayed.
1
A "
!
" is displayed when a watchdog timer error occurs.
8)
A "
!
" is displayed when a writing data error occurs; the channel where it
occurred and error code are displayed.
34
9)
The specified status of the platinum temperature sensor that is used is
displayed.
36
10)
For A1S62RD3
A "
!
" is displayed in a channel where broken wire was detected.
For A1S62RD4
A "
!
" is displayed in CH1 when a broken wire is detected in any channel.