Filter
Top Products
12. OPERATION OF EACH SPECIAL MODULE MONITOR SCREEN
12 - 56
MELSEC
GOT
12.18.7 Graph monitor (connect No. 0 to connect No. 7 when multiplex module is used)
2)
5
)
3)
1)
4)
No. Contents of display
Buffer memory address to
reference (hexadecimal)
1)
The connect number of the monitor being used is displayed.
2)
The current output value, a value between 0 to 4000 for the digital output
value of each channel, is displayed in a graph as a percentage ranging from
0 to 100%.
180 to 1FF
3)
When the A60MXT is used, the temperature detection value of each channel
is displayed.
200 to 27F
A "
!
" is displayed when a watchdog timer error occurs.
A "
!
" is displayed when an error occurs.
When the A60MXT is used, "1" is displayed when a temperature was input
that exceeds the temperature range set according to the digital output value
set for each channel.
4)
When the A60MXT is used, "1" is displayed when a temperature was input
that exceeds the measurement temperature range set for the measurement
range of each channel.
The set status of the data format for each channel is displayed.
0
5)
The specified conversion enabled/disabled status for each channel is
displayed.
10 to 17