Filter
Top Products
12. OPERATION OF EACH SPECIAL MODULE MONITOR SCREEN
12 - 4
MELSEC
GOT
12.1.4 Specifying monitor module and selecting monitor menu
The operation when starting the special module monitor for an optional module is
explained, using the positioning module (AD71) as an example.
[Operation procedure]
(1) From the modules assigned to slots 0 through
7 of each base unit, specify the special function
module where the format is displayed.
* For modules where the format is not
displayed, monitor with the system monitor
function (See Sec. 9.5.).
Specify input/output modules according to Sec.
13.1.
(2) Specify the menu corresponding to the type of
data to be monitored.
(3) With modules for which the monitor menu
cannot all be displayed in one screen, touch the
keys at the right of the screen to scroll
the display menu.
(4) Check the contents of the display. Carry out
the subsequent operation according to Sec.
12.2 to 12.27.
(5) Carry out tests for the displayed data according
to Sec. 12.1.5.
•
Change current value of buffer memory
•
Turn output signal from PLC CPU on and off
!!!
Display System Configuration screen. See Sec. 12.1.1.
[Specify module to be monitored] (Touch display position of module.)
[Specify menu to be monitored] (Touch display position of menu.)
Proceed to Sec. 12.1.5 and Secs. 12.2 to 12.27.
Display screen that shows monitor menu.
Display monitor screen of specified menu.