Filter
Top Products
17. USING THE NETWORK MONITOR SCREENS
17 - 11
MELSEC
GOT
17.3 Other station monitor
This section describes the structure of the monitor screen and the common operations
used when executing the other station monitor.
17.3.1 Display contents and keys functions: other station monitor menu
This section describes the other station monitor menu screen and the function of on-
screen keys. The menu screen for the other station monitor is displayed by touching a
module number displayed on the own station monitor screen. The menu screen
provides many options for the other station monitor.
(1) Display contents
When the A985/97*/960GOT is used When the A95*GOT is used
4)
3)2)
1)
5)
6)
The display details are the same
as the ones on the A985/97*
/960GOT.
(Display example)
No. Touch Key Contents of Display
1) Communications Status
Switches to a monitor screen that shows the
communications status of other stations. *
2) Data Link
Switches to a monitor screen that shows the data
link status of other stations. *
3) Parameters
Switches to a monitor screen that shows the
parameter status of other stations. *
4) CPU Action
Switches to a monitor screen that shows the CPU
action status of other stations.
5) CPU RUN
Switches to a monitor screen that shows the CPU
RUN status of other stations.
6) Loop
Switches to a monitor screen that shows the loop
status of other stations.
* This is not selectable when connected to a MELSECNET/B or MELSECNET (II)
local station.
(2) Key Functions
The table below shows the function of keys that are used on the other station
monitor screen.
Key
Function
Switches to the other station monitor screen.
RET
Returns to the own station monitor screen.
END
Exits the other station monitor screen and returns to the previous
monitor screen where the network monitor function was executed.