Filter
Top Products
12. OPERATION OF EACH SPECIAL MODULE MONITOR SCREEN
12 - 43
MELSEC
GOT
12.16.2 Operation monitor (connect No. 0 to connect No. 7 when multiplex module is used)
2
)
8
)
5)
7)
6)
9
)
4)
3)
1)
No. Contents of display
Buffer memory address to
reference (hexadecimal)
1) The connect number of the monitor being used is displayed.
2)
The specified conversion enabled/disabled status of each channel is
displayed.
10 to 17
3)
The set status of the data format for each channel is displayed.
0: Data format 48-4047
1: Data format 2048-2047
4
4)
The current output value, a value between 0 to 4000 for the digital output
value of each channel, is displayed as a percentage ranging from 0 to 100%.
100 to 17F
5) The error code is displayed when an error occurs. 5
6)
"1" is displayed when an error with error code 01 to 03 occurs for any
channel.
6
7) The set value of the sampling period is displayed. 3
8) The channels where direct access occurs are displayed. 1
9)
The current output value, a value between 0 to 4000 for the digital output
value for each channel where direct access occurs, is displayed as a
percentage ranging from 0 to 100%.
2