Filter
Top Products
11. OPERATION PROCEDURES FOR SPECIAL MODULE MONITOR FUNCTION
11 - 1
MELSEC
GOT
Chapter11 Operation procedures for special module monitor function
The operation procedure when using the special module monitor function is explained
in this chapter.
11.1 Operation procedures before starting special module monitoring
This section contains a summary of the procedure for transmitting the system program
(OS) for the special module monitor function and the special module monitor data from
the personal computer to the GOT until it is installed in built-in memory.
For details, please refer to the Help in Drawing Software. Details of the screen display
and key operation are shown in the Help.
Start
End
!!!
!!!
!!!
!!!
Connect GOT and personal computer.
Start up GOT.
It is not necessary to set up and operate the GOT
after startup.
Start up personal computer and start
drawing software.
With the drawing software, transmit the OS
for the special module monitor function from
the personal computer to the GOT and
install it in the built-in memory.
Transmit the data using the installation dialog box.
Installation is complete.
When installation is finished, "Completed" is displayed
on the installation dialog box.
With the drawing software, transmit the
special module monitor data from the
personal computer to the GOT and install it
in the built-in memory. (Download)
When download is finished, the special
module monitor can be operated through the
GOT.
When download is finished, "Completed" is displayed
on the download dialog box.
Drawing software operation is finished.
Proceed to Section 12.2 to operate the special module
monitor.
Installation is complete.
Transmit the data using the download dialog box.
!!!
!!!
11