Filter
Top Products
9. OPERATION OF THE VARIOUS SYSTEM MONITOR SCREENS
9 - 7
MELSEC
GOT
9.2 Entry monitor
Enter the device to be monitored in advance. The function that monitors only the
device that was entered is called the "entry monitor".
The entry monitor operation when executing the system monitor function is explained
below.
9.2.1 Basic operation
The entry monitor operation procedure is shown below.
See Sec. 9.1.1.
When entry is complete, display the Device
Monitor screen.
Select "Device Monitor" with the basic screen.
[Operation procedure]
TEST MENU FORM
SET
PRESS "SET" KEY, SELECT
ITEM THEN ENTER DEVICE
TYPE & NO.
Enter the monitor device. (*1)
D 15 -2147483648 DW
D 10 -32767
X 001
!
M 25
"
Y 70
!
W 200 43
R 50 68378428 DW
D 0 3
NETWK NO.[ 0] STATION[FF]
DEVICE MONITOR
TEST
MENU
FORM
SET
Change the screen display.
(*2)
......When a screen other than the basic screen is displayed,
touch
MENU
at the top of the currently displayed screen,
display the basic screen, and select Device Monitor.
......When you touch
MENU
, you return to the basic screen.
When you touch
FORM
, you can change this display
(See Sec. 9.1.2.).
When you touch
SET
, you can specify the monitor
station and device (See Sec. 9.1.3.).
......Set the station and device to be monitored.
For the setting method, see Sec. 9.1.3.
*1 Monitor device entry is in station modules.
If you change the station for the monitor device, all
monitor devices entered before that are invalid.
*2 A maximum of 8 entry devices can be entered.
To enter more than 8, delete in order from the old entry
device. The 8 most recent entry device will be
monitored.
As needed, re-enter after deleting the entry device.
(For the method of deletion, see Sec. 9.2.3.)
......Do if needed.
For the display change method, see Sec. 9.1.2.