Filter
Top Products
3. SPECIFICATIONS
3 - 14
MELSEC
GOT
3.5.5 Display format on the display
The following describes the position and content of each data field in the display area
provided by the List editor function.
Current mode display
Valid key display
Step number;
device name and number
Program list etc.
The 4th line displays data (program
name, device name, etc.) entered
by the user.
(1) Mode and valid key display
The following describes the mode and valid key display.
The mode display shows the list editor function mode selected by the user.
The valid key display shows which of the two functions assigned to each key is
currently available: the function indicated at the upper part of the key or the
function indicated at the lower part of the key.
R
Current mode display
Valid key display (This display is not always available.)
With regard to keys framed in dotted lines in the figure
shown at the left, the valid key display indicates which
of the two functions assigned to each key is valid:
: Function indicated at the upper part of each key is available.
: Function indicated at the lower part of each key is available.
Example: key
SHIFT
PARAM
OTHER
HELP
F
MRDDECRET
>MOV < P = MPP
MPSWBINBCD
_
+
LD AND OR MC NOP
LDI
ANI ORI MCR
SET
SET ANB
CJ
PLS
CLEAR
RST SFT
ORB
OUT
SP GO
WRITE
READ
INSERT
DELETE
INCDB TOFROM
A
* /
H
CALL
Function indicated at the lower part of the key is
available. ......
Function indicated at the upper part of the key is
available. ......
FROM
A
(Display) (Mode)
R .................. Read mode
W ................. Write mode
I ... ..... .... .... .... I nsert mode
D .................. Delete mode
P ................... Parameter mode
O ....... ........ ... Other mode
END
BCDEF
GIJKL
MNOPQR
STUVWX
CDEFYZ
89AB
4567
0123
FROM
A
( )
( )
POINTS
To switch between two functions of keys (functions indicated at upper and lower
parts of the keys), press the
SHIFT
and
SET
keys.
For details, see Section 20.1.1