Filter
Top Products
9. OPERATION OF THE VARIOUS SYSTEM MONITOR SCREENS
9 - 6
MELSEC
GOT
9.1.4 Changing screens
This section shows the screen changes when executing each monitoring operation of
the system monitor function from the status where the user-created monitor screen is
displayed.
Start
User-created monitor screen
Utility screen
Basic screen
(Function change menu screen)
(See Sec. 9.1.1.)
Monitor screen
for selected function
(See Sec. 9. 2.)
Touch
(*1)
(*1)
Touch END
Touch PLC.MON.
1)
Touch MENU
Touch MON
4)
Test menu screen
(See Sec. 9.6.)
/
Device setting menu screen
(See Sec. 9.1.3)
Display change menu screen
(See Sec. 9.1.2.)
3)
2)
Touch
TEST
Touch SET
Touch FORM
2
)
3
)
4
)
Touch SET
Touch FORM
Touch STOP
2
)
1
)
4
)
2
)
Touch
SET
Touch MENU
Touch STOP
Touch EXEC
2
)
1
)
3
)
Touch MENU
Touch STOP
2
)
Touch FORM
#######################
The circuit monitor function and special module function
can also be started from the Utility screen.
*1 Touch the key that sets the touch switch (expanded)
function with the graphics software. and start the
system monitor operation.
When the Utility screen is dislayed, touch PLC.MON.
to start the system monitor function.