Filter
Top Products
9. OPERATION OF THE VARIOUS SYSTEM MONITOR SCREENS
9 - 11
MELSEC
GOT
9.3.2 Batch monitor screen display and key functions
In this section, the Batch Monitor screen display and the functions of keys displayed at
the top of the screen are explained.
(1) Display
1)
2)
3)
When comment is not displayed: max. 16 devices
When comment is displayed : max. 8 devices
Display when system monitoring
!
Bit device
!!!!!!!!!"
:
ON
#
: OFF
!
Word device
!!!!!
Current value
NETWK No.[ 0] STATION[FF]
BATCH MONITOR TEST MENU FORM SET
D 10 32767[ ]
D 11 0[Inventory quantity ]
D 12 0[Shipment quantity ]
D 13 -1[ ]
D 14 0[Warehouse A temperature]
D 15 3[Warehouse B temperature]
D 16 0[ ]
D 17 0[Production plan ]
1)
Displays the keys that are used with the operation of the Batch Monitor screen
shown in (2) (Touch input).
2) Displays the monitor station network No. and station No.
3)
Displays the status and current value of the monitor device (The screen above
shows when the monitor module is 16 bits.).
(2) Key functions
The chart below shows the functions of the keys that are used with the Batch
Monitor screen operation.
Key Function
MENU
Move to basic screen (function change menu screen) for changing to
another monitor function or ending the system monitor
(See Sec. 9.1.1.).
FORM
Move to display change menu screen for changing the numerical
display on the Batch Monitor screen (decimal/hexadecimal) or
changing the comment display (on/off) (See Sec. 9.1.2.).
SET
Move to device setting menu screen to change the monitor device or
execute a test.
•
Change of monitor device (See Sec. 9.1.3.)
•
Test (See Sec. 9.6.)
Scroll the display up or down one line, and display the monitor device
that is not displayed (just before or after the current display).
: Scrolls down one line.
: Scrolls up one line.