Filter
Top Products
11. OPERATION PROCEDURES FOR SPECIAL MODULE MONITOR FUNCTION
11 - 2
MELSEC
GOT
11.2 Operation procedures from user-created monitor screen display to start of special module monitor
This section describes the operation procedure for the GOT when starting each
operation of the special module monitor function after the system program (OS) of the
special module monitor function has been installed in the GOT built-in memory, and
downloading the special module monitor data.
Start
!!!
See Secs. 12.1.3, 12.1.4.
!!!
Install memory board on the GOT
Start up GOT.
Display the use-created monitor screen.
Start the special module monitor function.
Display the system configuration screen.
!!!
!!!
Specify the module to be monitored.
Display the special module monitor menu.
Select from the menu.
!!!
Display the monitor screen for the special
module.
Check the data for the module with the
displayed contents.
Change the data.
Change the current value of the specified
area.
(
∗
1)
!!!
When starting, the module format and related data
are not displayed.
When reading of module data from the PLC CPU is
complete, the module format and related data is
displayed.
See Sec. 12.1.1.
When END is selected, the special module monitoring
ends and the display moves to the original screen where
the special module monitor function was begun.
See Sec. 12.1.4.
The Special Module Monitor Screen is displayed by
selecting it from the menu.
See Sec. 12.1.4.
See Sec. 12.1.2.
See Secs. 12.2 to 12.27.
!!!
Carry out the following operation when changing the
current values of the buffer memory that is displayed
on the monitor screen.
See Sec. 12.1.5.
Touch the key where the touch switch (expanded)
function was set with the drawing software, and start
the system monitor function.
When the Utility screen is displayed, touch SP.Mon.
to start the s
p
ecial module monitor function.
∗
1
System Configuration NETWK No. [0] PLC STATION [FF]
END
MAIN
NET
PLCNo.
CPU
OUT64
Y 0
IN 64
Y 40
AJ7 1
PT32-S3
IN 64
Y 40
SP
X,Y A0
IN 16
Y120
OUT32
Y130
AJ71
X,Y150
A62LS
X,Y180
SP
X,Y230
Ext.1
Ext.2
X,Y 80
AJ7 1
PT32-S3
X,Y 80
A616DA
X,Y 100
A616AD
X,Y 200
A616TD
X,Y 280