Filter
Top Products
10. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
10.2 Communication Detail Setting
10 - 13
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS
AND STANDARD
POINT
POINT
POINT
(1) Selection of keyword protection level
For the devices which can perform the online operation of FX PLC, 3 levels of protection can be set.
When the monitoring or setting change by online devices is needed, set the keyword taking the following into
consideration.
(a) When only keyword is registered
Protection level is selected by the head character of keyword.
(b) When keyword and 2nd keyword are registered
Protection level is selected by [Registration conclition].
(2) Applicability of monitoring for each keyword protection level
The applicability of monitoring for each protection level is as follows.
*1 When the T, C setting values are specified indirectly, changing devices is available.
(3) Difference between [All Protect] and [All operation prohibition]
When [All Protect] is selected, both device display and input by the programming tool or GOT are prohibited.
When [All operation prohibition] is selected, device display and input are possible although operations by the
programming tool are all prohibited.
All operation prohibition: Set the keyword starting with one of A, D to F, or 0 to 9.
Read/incorrect write protection: Set the keyword starting with B.
Erroneous write prohibition: Set the keyword starting with C.
Item
When only keyword is registered
When keyword and 2nd keyword are
registered
Keyword
unregistered/
protection
cancelled
All operation
prohibition
Read/
Incorrect
write
protection
Erroneous
write
prohibition
All Protect
Read/Write
prohibition
Write
Protect
Device monitoring
Device
change
T, C setting values
and file register
(from D1000)
*1 *1 *1
Other than the
above