Filter
Top Products
13 - 90
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
Display example of GOT data package acquisition
GOT data package acquisition operation
(4) Display operation of GOT data package acquisition
The GOT data package acquisition copies the installed OS or data in the GOT main unit to the SD card or USB
memory.
(This item explains using the A drive.)
Number Item Description
(1) Select drive
Displays the drive where OS and data can be copied.
The [A: Built-in SD card] is not displayed when SD card is not installed.
If the USB memory is not installed, [E: USB drive] is not displayed.
(2) Copy Touching the button starts copying.
1. Touching the drive name below [Select Drive] inverts
the touched drive name.
Touching the [Copy] button starts copying.
2. The display depends on the status of copy
destination and setup.
Operate with following the displayed dialog box.
3. After copying OS and data, the dialog box for
notifying the completion appears.
Touching the [OK] button closes the dialog box.