Filter
Top Products
14 - 4
14. GOT SELF CHECK (DEBUG AND SELF CHECK)
14.2 Self Check
Memory check operation
Carries out write/read check of memory.
POINT
POINT
POINT
When drive is not displayed
When the drive (memory) to check is not displayed, confirm the mounting procedure or memory type with reference
to the following.
8.1 SD Card
8.2 USB Memory
When no faults are found in mounting, etc, a memory failure may be arisen.
Replace the SD card or USB memory or built-in flash memory (C drive).
For details of built-in flash memory, contact your local Mitsubishi (Electric System) Service.
The following example explains about Memory Check using built-in flash memory (C drive).
For the Built-in SD card (A drive) memory check, install the SD card before carrying out the same key operations as
built-in flash memory. For the USB drive (E drive) memory check, install the USB memory before carrying out the
check operations.
1. Select a drive to check in the Select Drive screen in
Memory check and touch [Check] button.
2. Touching [Check] button displays the dialog box on
the left.
Selecting [OK] button displays the numeric keyboard
window.
Selecting [Cancel] button returns to the initial menu.
3. Touch to input password ( ) and touch
[Enter] key.
Touching [Enter] key executes read/write check for
the built-in flash memory, which is completed in
around 10 seconds.
5920