Filter
Top Products
13 - 54
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
Display example of Logging information
POINT
POINT
POINT
(1) About the displayed file
The files other than that for logging are not displayed on the logging information screen.
(2) Folders and files displayed
For the folders and files displayed, refer to the following.
13.1.4 Display file
Logging Information
Storage file/folder display screen
(2)
Logging Information
(1)
(3)
(4)
(5)
(6) (7)
(8)
Number Item Description
(1) Select drive The target drive can be selected. (Even if SD card is not installed, this message appears.)
(2) Kind
Indicates the type of the displayed name (file or folder).
In case of file, displays the extension; in case of folder, displays "DIR".
(3) Name
Displays the file name or folder name.
For the long file/folder name, entire part may not be displayed.
Confirm the nondisplayed part with the [Rename] button, etc.
( 13.2.6
■Logging information operation (6)Rename operation)
After confirmation, touch the [Cancel] button to cancel the operation.
(4) Path name Displays the path name of drive/folder which is currently displayed.
(5) Size Displays the size of the file displayed in [Name].
(6) The size of drive Displays the size in use and the entire size of the drive which is selected by drive selection.
(7) Operation switch Execution switch of each function.
(8) Number of files Displays the total number of the displayed files.