Filter
Top Products
16 - 8
16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS
16.3 BootOS and Standard Monitor OS Installation Using SD card or USB Memory
(2) When installing with USB memory
1. Install the USB memory in which BootOS, standard
monitor OS or project data is stored in the USB
interface of GOT.
2. Display the data control function screen (Utility) on
the GOT, and install BootOS, standard monitor OS.
3. Do not pull out the USB memory or power off the
GOT while install execution.
4. The GOT restarts automatically after the installation
is completed.
5. After confirming normal restart, display the USB
device status screen and remove the USB memory
from the USB interface of GOT.
13.2.9 USB device status display
Touch [Install]
Now installing BootOS.
Reboot.