Filter
Top Products
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
11.2 Operation Setting (Settings Regarding Operation)
11 - 13
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS
AND STANDARD
11.2.6 Adjusting the touch panel position (Touch panel calibration)
Touch panel calibration setting function
Touch panel reading error can be corrected.
Normally the adjustment is not required, however, the difference between a touched position and the object position
may occur as the period of use elapses.
When any difference between a touched position and the object position occurs, correct the position with this
function.
Display operation of Touch panel calibration
Run Stop Run Stop
Before adjustment After adjustment
The [Run] will operate though you
intended to touch the [Stop] button.
The [Stop] button can be touched
without fail.
GOT setup
Operation
Tou ch
[GOT setup]
Tou ch
[Operation]
Main menu
Touch panel calibration
Tou ch
[Touch panel
calibration]
(
9.3 Utility Display)