Filter
Top Products
13 - 12
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
Display example of Alarm information
POINT
POINT
POINT
(1) Display of creation date and time
The creation date and time display is not updated even if a file is created or updated while displaying the
alarm information display screen.
If close the screen currently displayed (moving the screen to the folder of the upper hierarchy, etc.) and
display the screen again, the updated contents are displayed.
(2) Folders and files displayed
For the folders and files displayed, refer to the following.
13.1.4 Display file
Alarm information: Storage file/folder display screen
(2)
Alarm information screen
(1)
(3)
(4)
(5)
(6)
(7) (8)
(9)
Number Item Description
(1) Select drive
The target drive which displays file or folder can be selected.
When SD card or USB memory is not installed, the following drives are not displayed.
• SD card: [A: Built-in SD card]
• USB memory: [E: USB drive]
(2) Kind
Indicates the type of the displayed name (file or folder).
The file is indicated with an extension, while the folder is indicated with "DIR."
(3) Name
Displays the file name or folder name.
For the long file/folder name, entire part may not be displayed.
Confirm the nondisplayed part with the [Copy] button, etc.
( 13.2.2
■ Alarm information operation(4)Copy operation)
After confirmation, touch the [Cancel] button to cancel the operation.
(4) Path name Displays the path name of drive/folder which is currently displayed.
(5) Size Displays the size of the file displayed in [Name].
(6) Date and time The date and time when each file was created are displayed.
(7) The size of drive
Displays the size in use and the entire size of the drive which is selected by drive selection.
(Only the size in use is displayed when selecting the C drive.)
(8) Operation switch Execution switch of each function.
(9) Number of files Displays the total number of the displayed files.