Filter
Top Products
A - 3
[MOUNTING PRECAUTIONS]
CAUTION
● Use the GOT in the environment that satisfies the general specifications described in the User's
Manual.
Not doing so can cause an electric shock, fire, malfunction or product damage or deterioration.
● When mounting the GOT to the panel, tighten the mounting screws within the specified torque range.
Undertightening can cause the GOT to drop, short or malfunction. Also, undertightening can disable
waterproof or oil proof effect.
Overtightening can cause a drop, short circuit or malfunction due to the damage of the screws or the
GOT.
Also, "distortion" of the GOT or the panel may disable waterproof or oil proof effect.
● Never drop cutting chips and electric wire chips into the ventilation window of the GOT when you drill
screw holes or perform wiring.
Otherwise, fire, failure or malfunction may be caused.
● When inserting/removing a SD card into/from the GOT, turn the SD card access switch off in
advance.
Failure to do so may corrupt data within the SD card.
● When removing a SD card from the GOT, make sure to support the SD card by hand, as it may pop
out.
Failure to do so may cause the SD card to drop from the GOT and break.
● When installing a USB memory to the GOT, make sure to install the USB memory to the USB
interface firmly.
Failure to do so may cause a malfunction due to poor contact.
● Before removing the USB memory from the GOT, operate the utility screen for removal.
After the successful completion dialog box is displayed, remove the memory by hand carefully.
Failure to do so may cause the USB memory to drop, resulting in a damage or failure of the memory.
● Operate and store the GOT in environments without direct sunlight, high temperature, dust, humidity,
and vibrations.
● When using the GOT in the environment of oil or chemicals, use the protective cover for oil.
Failure to do so may cause failure or malfunction due to the oil or chemical entering into the GOT.