Filter
Top Products
4 - 2
4. PARTS NAME
4.2 Back Panel
4.2 Back Panel
Power supply terminal layout
Battery cover opened
(6)
(13)
(15)(10)(3)(12)
(8)(7)(5)(1) (4)
(2)
(14)
(9)
(11)
No. Name Description
(1) RS-232 interface
For communicating with controller (PLC, microcomputer board, bar code reader, RFID, etc) or PC (OS
installation, project data download, transparent) (D-sub 9pin male)
(2) RS-422/485 interface For communicating with controller (PLC, microcomputer board, etc) (D-sub 9pin female)
(3) USB interface USB interface for data transfer, data storage (host)
(4)
Preventive hole from removing
for the USB cable
Hole fixed with banding band or others as a prevention from removing for the USB cable
(5) Rating plate (nameplate) The model name, current consumption, product number, H/W version, and BootOS version are described.
(6) SD card interface Interface for installing the SD card to the GOT
(7) SD card access LED Lit: SD card being accessed, Not lit: SD card is not accessed.
(8) SD card access switch
Prohibits accessing the SD card removing the card from the GOT.
ON: SD card being accessed (SD card removal prohibited)
OFF: SD card not accessed (SD card removal possible)
(9) Battery
GT11-50BAT battery for storing clock data, alarm history, recipe data, time action setting value, advanced
alarm, advanced recipe, logging, hard copy and SRAM user area
(10) Battery cover Opens/closes when the battery is replaced or the terminating resistor is selected.
(11) Power terminal Power terminal and FG terminal (for power supply (24VDC) to GOT and grounding)
(12) Power terminal cover Opens/closes when the power terminal is connected. (color: transparent)
(13) Reset switch Switch for resetting the hardware (Use an isolated rod to operate.)
(14)
Terminating resistor selector
switch
For switching the RS-422/485 communication interface terminating resistor
(15)
Ethernet communication status
LED
SD RD: Turns on in green during data communication,
100M: Turns on in green during 100Mbps transmission.