Filter
Top Products
14. GOT SELF CHECK (DEBUG AND SELF CHECK)
14.1 Debug
14 - 1
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS
AND STANDARD
14. GOT SELF CHECK (DEBUG AND
SELF CHECK)
The GOT can display the screen for debugging and self-checking.
The following describes the functions available as the debugging and self checking functions.
14.1 Debug
In this manual, the overview of the debugging function is described.
For display contents and operation procedure of debugging, refer to the following manual.
GOT1000 Series Extended/Option Functions Manual for GT Works3
The following describes the functions available as the debugging function.
14.1.1 System monitor
System monitor allows monitoring and changing the devices in controllers.
For display contents and operation procedure, refer to the following manual.
GOT1000 Series Extended/Option Functions Manual for GT Works3
14.1.2 A list editor
MELSEC-A list editor allows changing the sequence programs in ACPU/QCPU (A mode).
For display contents and operation procedure, refer to the following manual.
GOT1000 Series Extended/Option Functions Manual for GT Works3
14.1.3 FX list editor
FX list editor allows changing the sequence programs in an FX PLC.
For display contents and operation procedure, refer to the following manual.
GOT1000 Series Extended/Option Functions Manual for GT Works3
Item Description Reference
Debug System monitor, A list editor, FX list editor, Backup/restoration 14-1
Self check Memory check, Display check, Touch panel check, I/O check, Ethernet status check 14-3
System alarm display GOT error, CPU error 14-19
GOT start time GOT start time 14-21
Item Description Reference
System monitor The device of PLC CPU and buffer memory of intelligent function module can be monitored or tested. 14-1
A list editor The sequence program of ACPU can be list edited. 14-1
FX list editor The sequence program of FXCPU can be list edited. 14-1
Backup/restoration Data can be backed up/restored from the controller to GOT, or backup data can be deleted. 14-2