Filter
Top Products
8. OPTION
8.8 Connector Conversion Adapter
8 - 11
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
PARTS NAME
5
UL, cUL
STANDARDS AND
EMC DIRECTIVE
6
INSTALLATION
7
WIRING
8
OPTION
8.8 Connector Conversion Adapter
GT10-9PT5S type connector conversion adapter enables an easy crossover wiring for the multi-drop-connected GOTs.
For the wiring between the connector conversion adapter and the controller, refer to the following manual.
GOT1000 Series Connection Manual (Mitsubishi Products) for GT Works3
8.8.1 Applicable connector conversion adapter
The following connector conversion adapter is applicable.
8.8.2 Installing procedure of connector conversion adapter
Model name Description
GT10-9PT5S For GOT multi-drop connection
1. Turn the GOT power off.
2. Connect the connection conversion adapter to the RS-
422/485 interface on the GOT.
3. Fix the connection conversion adapter to the GOT
using the provided M3 tapping screws.
Tightening torque: 0.3 to 0.6 N•m