Filter
Top Products
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
13 - 17
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS
AND STANDARD
13.2.3 Project Information
Function of project information
The project data files stored in each drive (A: Built-in SD card, C: Flash Memory, E: USB memory) can be displayed
by lists.
In addition, the files can be downloaded, uploaded, deleted or copied, etc.
POINT
POINT
POINT
Notes on operating project data
When the OS boot drive is set to [A: Built-in SD card], deleting, copying, downloading, setting up, and uploading
project data are not available.
Display operation of Project information
Function Description Reference
Displaying file, folder data The file/folder type, name, data size and creating date & time are displayed. 13-18, 13-19
Delete Deletes project data. 13-19
Copy Copies project data. (can copy the A drive and E drive) 13-20
Property display Displays the project data creation date, author name and the version of GT Designer3. 13-21
Data check Data check of files is possible. 13-22
Download
Downloads the project data written in the A drive (Built-in SD card)/E drive (USB drive) to C drive
(Flash Memory).
13-22
Setup The project data to be displayed can be selected. 13-24
Upload
Uploads the project data written in the C drive (Flash Memory) to the A drive (Built-in SD card)/E
drive (USB drive).
13-25
Setup cancel Cancels the item which is selected for the project data to be displayed. 13-26
Program/Data control
Project information
Main Menu
Select a drive and
operate project data
files
Tou ch
[Program/data control]
Tou ch
[Project information]
(
9.3 Utility Display)