Filter
Top Products
13 - 70
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
SRAM control operation
(1) Operation to initialize all or selected areas of the SRAM user area
1. Perform any of the following operations.
• To initialize all areas of the SRAM user area,
touch the [Initialize all] button.
•
To initialize selected areas of the SRAM user area,
select the check box of the area to be initialized,
and then touch the [Initialize selected area] button.
(Example: Dialog box when touching the [Initialize all] button)
2. The dialog box shown left appears.
Check the description of the dialog box. To initialize
the SRAM user area, touch the [OK] button.
To cancel the initialization, touch the [Cancel] button.
3. When touching the
[OK]
button in , the dialog box
shown left appears for recheck.
Touching the [OK] button starts the initialization.
Touching the [Cancel] button cancels the
initialization.
4. The completion dialog box appears when the
initialization is completed.
Touching the
[OK]
button closes the dialog box.